Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Installation for Frisco Homeowners
A new driveway gate in Frisco, TX typically costs between $2,800 and $12,000 installed, depending on whether you choose a welded steel swing gate, a sliding gate on a track, or a full automation package. Most residential installations take one to two days on site once materials are fabricated and the concrete has cured. Vance Gate Repair has installed and repaired over 22,000 gates since 2014, and every installation starts with a written price before anyone picks up a tool.
What you get with us is different from what most Frisco gate companies offer. Before any work begins, you receive a written scope, a written price, and a photo record of what we found on site. That’s not a sales tactic. That’s how Adrian Vance ran commercial access-control sites starting in 2014, and it’s how we run every residential driveway gate in Frisco today. If you need a gate installed quickly, call (940) 290-7996 and a live person answers, 24 hours a day.
What Our Gate Installation Service Includes
A gate installation is more than setting two posts and hanging a panel. The post footings have to hold the weight of the gate through wind, rain, and thousands of open-and-close cycles. The operator has to be matched to the gate’s weight and travel. The safety edges and photo-eyes have to be set and tested. Every installation we do in Frisco includes all of that: fabrication or procurement, concrete work, mounting, automation, safety devices, and a documented record of the finished job. Here’s how each type breaks down.
Driveway Gate Installation
A driveway gate is the full assembly across your vehicle entrance: the gate panel or panels, the posts, the hinges or track, and usually an automated operator and a keypad or remote system. You need this when you want to control who drives onto your property, whether that’s for privacy, keeping solicitors out, or keeping kids and pets away from the street. In Frisco neighborhoods like Stonebriar, Chapel Creek, and The Trails, we regularly install powder-coated steel driveway gates matched to the home’s existing fence line and architecture. We measure the opening, check the slope and set-back, and specify a gate that won’t sag or bind within the first Texas summer.
Pedestrian Gate Installation
A pedestrian gate is the walk-through gate beside or near the driveway, usually matched to the fence style and fitted with a latch or an electronic strike. You need one when the driveway gate is closed and you still want a secure, convenient way for people to enter without opening the whole driveway. In Frisco, we see a lot of pedestrian gates as part of new perimeter fence projects in neighborhoods like Newman Village and Pearson Farms. We set the posts in concrete, hang the gate with adjustable hinges, and set the latch so it closes cleanly every time without slamming.
Sliding Gate Installation
A sliding gate runs horizontally on a track or cantilever system instead of swinging open. You need one when the driveway slopes up from the street, when the driveway is short and a swing gate would hit a parked car, or when the opening is unusually wide. Sliding gates are common in Frisco on wider lots and on properties that back up to busier streets. We set the track, hang the gate on proper rollers, and set the operator with the correct travel limits so the gate doesn’t slam into the end stop. A sliding gate that’s set correctly rolls almost silently; one that’s not will eat rollers and shake the operator loose within a year.
Swing Gate Installation
A swing gate is the most common driveway gate type in Frisco: one or two panels hinged on posts that swing inward or outward. You need this when you have enough flat space for the gate’s arc and a driveway that isn’t steeply graded. We build swing gates as single or double configurations, and we set the hinges, the post depth, and the operator geometry so the gate doesn’t drag or bind. The biggest swing gate failure we see in Frisco neighborhoods like Lawler Park and Hollyhock is undersized hinges on oversized gates; we don’t cut that corner.
Double Gate Installation
A double gate is a pair of swing gates that meet in the middle, typically used for driveways between 12 and 24 feet wide. You need one when the opening is too wide for a single panel to swing without drooping over time, or when you want the classic look of paired gates. The critical part is the center alignment: both leaves have to meet flush, with the operator sequence set so one closes before the other, and a solid center stop installed to keep the closed gate from blowing through in high wind. We set pairs like this all over Frisco, and we photograph the closed alignment as part of the handoff record.
Security Gate Installation
A security gate is a gate built and installed with a higher standard for forced-entry resistance, often paired with access control like a keypad, card reader, or intercom. You need one when the gate’s main job isn’t convenience, it’s preventing vehicle or foot access by anyone who doesn’t belong. Security gates in Frisco often include heavier steel frame construction, tamper-resistant hardware, and integration with a gate access system that logs entries. We install security gates with the same documented-wiring habit we use on commercial jobs: every connection is photographed, labeled, and left with you in the job record.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Installation
We install and program gate operators from every major brand, and we carry OEM parts for the most common models on Frisco properties. If you have a LiftMaster LA400 or a similar model, we’ve set hundreds of them: travel limits, force settings, and safety inputs are things we dial in precisely rather than leaving at factory defaults. LiftMaster makes solid residential operators, and the installation quality determines whether they last five years or fifteen.
FAAC and BFT machines show up frequently on higher-end Frisco homes, often paired with steel swing gates. These are Italian-built hydraulic and electromechanical operators, and they reward careful setup: correct leaf delay, correct torque limiting, and clean wiring. We’ve worked on enough of them to know their quirks. Whether you have one of those brands, a Mighty Mule on a ranch gate, or something else entirely, we’ll work on whatever motor is already on the property instead of steering you toward a replacement you don’t need.
BeforeAfterSigns You Need Gate Installation Right Now
- The gate sags and drags on the ground every time it opens. A sagging gate is a hinge or post problem, and it only gets worse. Every cycle puts more stress on the operator until the motor burns out or the hinge tears out of the post. If the gate is more than a few years old and the post is leaning, replacement is usually cheaper than rebuilding the existing setup.
- The existing gate was never automated and you’re tired of getting out of the car. A manual gate on a busy Frisco street means stopping traffic, getting out, opening, pulling through, getting out again. An automated gate installed with a properly matched operator eliminates that entirely. The operator, not the gate, does the work.
- The current gate doesn’t actually close anymore without manual help. If you have to lift the gate or push it the last few feet, the geometry is already gone. Continuing to use it wears out the operator and the hinges simultaneously. A properly hung gate closes under its own momentum and stops where it’s supposed to.
- You bought the house with a gate but it was never installed correctly. We see this in Frisco frequently: a builder or previous owner hung a gate on undersized posts or skipped the concrete footer entirely. The gate wobbles, the operator struggles, and it fails within two years. Starting fresh with properly set posts and a correctly spec’d gate is the only durable fix.
- The existing gate is too short or too open to do its job. If people can climb over it, see through it, or simply walk around it, the gate isn’t providing security. A new installation with proper height, full-height pickets, and a secure latching system changes what the gate actually does for your property.
None of these are emergencies in the sense that a broken garage door spring is an emergency. But every month you wait, the damage compounds and the eventual repair bill gets larger. If any of these describes your gate, call (940) 290-7996 and we’ll give you a straight answer on whether repair or replacement makes more sense.
Our Gate Installation Process - Step by Step
- 1
Site measurement and written quote. We come out, measure the opening, check the slope, note the soil condition, and look at what’s already there. Then we hand you a written price for the complete job: gate, posts, concrete, operator, safety devices, and labor. That price is agreed and signed before any work starts, under Haven Standard Clause 1. No verbal estimate, no surprise invoice at the end.
- 2
Fabrication or procurement. If the gate is being custom-built, we order the steel, weld and finish it, and prep it for powder coating. If it’s a standard gate package, we source the panel, operator, and hardware. Either way, you know what you’re getting before it arrives on site. We don’t show up with mystery materials.
- 3
Post setting and concrete work. Posts go in first, set below the frost line with proper concrete footings. In Frisco’s clay soil, we dig deeper and wider than the minimum, because the expansion and contraction cycle is what loosens shallow posts over time. The concrete cures before we hang anything on it. That delay is part of the job; skipping it is how gates fail early.
- 4
Gate hanging, operator mounting, and safety setup. We hang the gate on properly sized hinges or rollers, mount the operator, and set every adjustment: travel limits, force settings, auto-close timer if you have one. Then we install and test the photo-eyes, safety edges, and any keypad or intercom. Each setting is recorded.
- 5
Documented handoff. Before we leave, you get a photo log of everything we installed and adjusted, plus a written record of part numbers and settings. That’s Haven Standard Clause 4: evidence on every job at no additional charge. If anything needs adjustment in the next year, you’re covered under the 365-Day Done Right Promise.
How Much Does Gate Installation Cost in Frisco?
For Gate Installation pricing context, a single swing gate with automation in Frisco runs most homeowners between $4,500 and $9,000, including the gate panel, posts, concrete, operator, safety devices, and labor. A double swing gate typically runs $6,500 to $14,000 depending on width, material, and operator type. A sliding gate on a track or cantilever system usually starts around $7,000 and can reach $18,000 or more for wide openings with heavy steel panels and commercial-grade operators. A simple pedestrian gate without automation is the most affordable option, often between $800 and $2,500 installed.
What affects the price most is the gate’s width and weight, the material (welded steel is more than aluminum, and aluminum is more than a standard tube gate), and the operator brand. A basic Mighty Mule operator costs less than a FAAC or BFT hydraulic unit, and the difference is in duty cycle and longevity. Other costs that get overlooked: an extra keypad, an exit probe or loop detector, a backup battery, and any trenching for low-voltage wiring between the operator and the keypad or intercom.
The way to avoid overpaying is to get a written scope, not a line item you can’t verify. Ask what’s included: who does the concrete, what concrete PSI is used, what voltage the operator draws, and whether a battery backup is factored in. If another company already gave you an estimate, bring it to us. We’ll review it at no cost as a free second opinion. The estimate we hand you is the price you pay, agreed before any work starts.
Gate Installation Near Frisco - Our Service Area
Vance Gate Repair installs driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates throughout Frisco and the surrounding cities: Prosper, The Colony, Little Elm, Plano, Allen, McKinney, Celina, Carrollton, Murphy, Coppell, and Flower Mound. Typical response for a free installation estimate is same-day or next-day, and a live person answers at (940) 290-7996 around the clock. You can also see our complete Gate Installation in Frisco service details or return to the home page.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Installation in Frisco
our Gate Installation in Frisco covers the complete process of setting posts in concrete, hanging a gate panel (or panels), mounting an automated operator, and connecting the safety devices and access controls that make the gate work safely. In Frisco, it usually also includes the low-voltage wiring run from the operator to a keypad or intercom. A proper installation includes a written scope, a written price, and a documented record of what was installed, which is exactly what we provide on every job.
Most residential gate installations in Frisco take one to two days on site, but the total timeline includes concrete curing time. Posts must cure for at least 48 to 72 hours before a heavy swing or sliding gate is hung on them, depending on weather and concrete mix. From first measurement to final handoff, expect one to two weeks for a standard installation. Custom fabrication adds time, and we’ll give you a written timeline before you sign anything.
A single automated swing gate in Frisco typically costs $4,500 to $9,000 installed, while a double gate runs $6,500 to $14,000 and a sliding gate starts around $7,000. The final number depends on gate width, material, operator brand, and how much concrete and wiring work the site requires. Call (940) 290-7996 for an exact written quote; estimates are free and the price is agreed before any work starts.
Yes. We install and program LiftMaster operators regularly, including the LA400 and other common residential models. We set travel limits, force sensitivity, and the safety photo-eye circuit so the gate stops and reverses properly. If you already have a LiftMaster on the property and the gate itself needs replacing, we’ll work with the existing operator whenever it makes sense rather than selling you a new one.
If your gate is off its track, jammed open, or posing an immediate security problem, we can often dispatch same-day in Frisco. A live person answers the phone 24 hours a day at (940) 290-7996, and we’ll tell you honestly whether it can wait or needs immediate attention. For a full custom installation, the concrete work and fabrication mean it’s not a same-day job, but we’ll get you measured and quoted right away.
Every installation we complete in Frisco is covered by our 365-Day Done Right Promise: if anything isn’t right within one full year, we make it right at no additional charge. That covers the workmanship and the installation. Manufacturer warranties on operators and hardware are separate and we’ll give you the paperwork for those as well. The promise is simple: if it’s not right, we fix it.
Clear the area around the gate opening: move vehicles, trash bins, and anything stored near the posts. If you have pets, keep them inside during the work. Know where your property line is, and if you’re in an HOA, check whether gate height, color, or style requires approval before we start. We’ll walk you through all of this at the estimate, and we’ll note any potential issues before they become change orders.
Schedule Your Gate Installation Service in Frisco Today
You’ll get a written price before any work starts, a photo record when the job is done, and a full year of coverage if anything isn’t right. That’s the deal on every gate we install in Frisco. Call (940) 290-7996 now for a free, no-obligation estimate and a straight answer on what your gate will cost.