Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterTrusted Gate Repair for Frisco Homeowners
A gate that won’t open is a problem the moment you’re sitting in the driveway, late for work, pressing the remote a third time. We fix that. Vance Gate Repair has handled more than 22,000 gates since 2014, and our Frisco calls run from a limit switch set wrong to a weld that finally let go on a 400-pound iron swing gate. Adrian Vance built this company on commercial access-control documentation, which means every residential repair we do in Frisco comes with a written price before any tool comes out and a photo record before we leave. A live person answers at (940) 290-7996, any hour, and we dispatch background-checked technicians to Frisco neighborhoods including Stonebriar, The Trails, Newman Village, and Starwood.
What Our Gate Repair Service Includes
Electric Gate Repair
When a gate stops responding to the remote or keypad, the problem sits somewhere in the circuit: a transformer, a control board, a limit switch, or the wiring between them. You’ll notice the motor hums but nothing moves, or the gate opens halfway and reverses, or the keypad lights up but the gate ignores it. Vance technicians trace the circuit with a multimeter, photograph every reading, and replace only the failed component. We leave you a written record of what was tested and what was installed, so no future technician has to rediscover the same failure.
Automatic Gate Repair
Automatic gates combine mechanical movement with electronic control, and the failure is rarely where the homeowner thinks it is. A gate that slams at the end of travel, stops six inches short, or refuses to close during certain hours usually points to a misprogrammed or damaged limit switch, a failing capacitor, or a photo-eye that’s drifted out of alignment. We service the automation on swing, slide, and cantilever gates across Frisco, and we treat a misaligned photo-eye as a safety repair, not a tune-up. Before we leave, we cycle the gate through ten full open-close sequences and photograph the final limit positions.
Hinge & Post Repair
Iron and steel gates are heavy, and every pound of that weight rests on the hinges and posts. In Frisco’s clay-heavy soil, posts shift over dry summers and wet winters, which pulls hinges out of square and makes the gate drag or bind. We grind out failed welds, replace bent or seized hinge pins, and reset posts with concrete where the base has cracked or sunk. If the post is rusted through at ground level, we cut it out and weld in a new section rather than hiding the problem with a coat of paint.
Gate Realignment
A gate that scrapes the driveway, won’t latch, or leaves a wide gap at the closed position has gone out of alignment. That’s often the result of a post leaning, a hinge wearing, or a vehicle bumping the gate at some point. We measure the reveal on both sides, check the gate’s weight against the hinge rating, and bring it back to a level, even gap. Realignment on a swing gate typically includes adjusting both hinges and re-setting the latch or magnetic lock so the gate closes and holds the way it did when it was installed.
Lock Repair
On a residential gate, the lock isn’t just the mechanical keyhole. It’s often a magnetic lock, an electric strike, or a solenoid-driven latch tied into the access control system. When the gate won’t lock, you lose the entire point of having a gate. We repair and replace mechanical gate locks, magnetic locks, and electric strikes, and we test the release from both sides before we finish. If your keypad or intercom triggers the lock intermittently, that’s a wiring or board issue, and we trace it the same way we would on a commercial site.
Weld & Rust Repair
Steel gates in North Texas live outdoors, and rust is rarely cosmetic for long. What starts as a bubbling paint line at a weld becomes a crack, and a crack becomes a gate that bends where it used to hold. We grind rust back to clean metal, weld the cracked joint with the correct filler for the gate’s alloy, and coat the repair so it doesn’t flash-rust in the same spot. This is the shop skill most gate companies don’t have in-house, and it’s the difference between a repair that lasts five years and one that lasts twenty.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Brands We Service for Gate Repair
We stock OEM parts and know the failure points on nine major automation brands, which matters when a Frisco homeowner has a Mighty Mule operator on a farm gate, a LiftMaster on a subdivision entry, a FAAC hydraulic operator on a heavy iron swing, or a BFT slide motor on a commercial driveway. Each brand has its own quirks: Mighty Mule boards are sensitive to voltage spikes from storms, LiftMaster units often show a diagnostic code before they fail completely, FAAC hydraulics need the fluid level checked on every service call, and BFT slide operators have a limit-switch setup that’s different from every other manufacturer.
We’ve repaired hundreds of each of those brands in the eleven years we’ve worked on gates, and we don’t steer you toward replacing an operator just because we don’t carry the part for it. The wiring diagrams we hand over on every visit come from Adrian Vance’s commercial access-control habit, developed on job sites where a gate that won’t open means a delivery truck blocking a dock. Whether you have a LiftMaster, Mighty Mule, FAAC, BFT, or any other make, we can put it back in service with a written record of exactly what we found and what we set.
BeforeAfterSigns You Need Gate Repair Right Now
- The gate opens a few inches and stops. This usually means a limit switch or an obstruction sensor is reading a false signal. If you keep pressing the remote to muscle it open, the gears are taking damage every cycle, and the repair gets more expensive the longer you wait.
- The gate jerks or shudders while moving. That’s often a failing capacitor, a worn gear, or a wheel pulling hard against the track. A gate that judders under load is telling you the motor is working harder than it was designed to, and the next stage is a gate that doesn’t move at all.
- The gate closes hard onto the stop or a car. A gate that no longer slows down before closing has lost its limit programming or its photo-eye alignment. This is a safety issue, not a convenience issue, and it deserves same-day attention before someone gets pinned or a vehicle gets creased.
- You hear a grinding or squealing from the motor housing. Metal-on-metal noise from the operator usually means a bearing, a gear, or a belt is worn past the point of lubrication helping. Running it in that condition chews through whatever is left and turns a cheap repair into an operator replacement.
- The gate sags visibly and the latch no longer lines up. When you can see the gate drop, a hinge or a post has failed. The longer it runs crooked, the more stress every other component takes until the whole hang is out of square and the repair spreads from one hinge to the entire frame.
Our Gate Repair Process - Step by Step
1. You speak to a person, not a menu. Call (940) 290-7996 and a live dispatcher answers, any hour of any day. We ask what the gate is doing, what brand it is, and how long it’s been failing. If it’s urgent, we route a Frisco technician to you the same day; if it’s not, we schedule the earliest slot that works for you.
2. The technician shows up with a name, a photo, and a plan. Before the technician arrives, you know who is coming and what they look like. They walk the gate, listen to it run, and check the visible components before quoting anything. On an electric gate, that means a multimeter reading on the board and at the motor, not a guess.
3. You get the written price before any work starts. Haven Standard Clause 1 is the rule here: the flat price is written down and handed to you before a tool is lifted. It covers parts, labor, and the specific repair being done. If the technician finds something else during the work, that gets a separate written note and your sign-off before any additional work happens.
4. The repair is done, then tested, not the other way around. We do the work AND THEN cycle the gate through open and close at least ten times. On automation repairs, we test the photo-eyes, reset the limit switches to the correct travel, and check the force setting so the gate doesn’t push too hard against an obstruction. On structural repairs, we check the measurement before and after to prove the alignment is actually corrected.
5. You get the documentation before we leave. Every Vance visit includes a photographed record: what was found, what was adjusted, what was installed, and the part number of anything replaced. It’s filed in your job record and left with you. The 365-Day Done Right Promise covers the work: if the repair isn’t right, we make it right, no argument and no extra charge, for one full year.
How Much Does Gate Repair Cost in Frisco?
What changes the price is the same list every time: the brand of the operator (OEM boards cost more than universal), the weight of the gate (a 400-pound iron swing needs heavier hinges than a 120-pound aluminum one), and whether the failure spread (a worn hinge left too long bends the post, and suddenly you’re resetting a post instead of just replacing a pin). The way to avoid overpaying is to get the problem fixed at the first symptom and to work with a company that shows you the written price before you commit to anything. Our estimates are free, and if you have a written quote from another company, bring it and we’ll review it at no cost. Call (940) 290-7996 and get a number in writing before you decide.
Gate Repair Near Frisco - Our Service Area
We dispatch gate repair technicians across Frisco and into the surrounding North Dallas suburbs every day. That includes Gate Repair in Prosper, Gate Repair in The Colony, Little Elm, Plano, Allen, McKinney, Celina, Carrollton, Murphy, Coppell, and Flower Mound. If you’re inside that radius, a technician is already working a route nearby. Home page has the full list of services and the direct line for urgent calls. Response times in Frisco proper run fastest, usually same-day for calls before early afternoon, and next-morning for anything after that.
Serving Frisco, TX - Our Local Coverage Area
We’re based in the Frisco area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
Frequently Asked Questions - Gate Repair in Frisco
What is gate repair?
Gate repair is the umbrella term for fixing anything that makes a gate fail to open, close, lock, or sit correctly. It covers the mechanical side (hinges, posts, welds, rollers, tracks) and the electrical side (motors, control boards, limit switches, photo-eyes, keypads, access wiring). In practice, a Frisco gate repair call usually starts as one symptom and turns into an identified root cause once a technician meters the circuits and checks the mechanical hang. Vance treats every gate repair as a documented repair: written price before work, photo record after.
How long does gate repair take?
Most gate repairs on a mechanical component (a hinge, a lock, a limit switch) are done in one visit, typically one to three hours. An operator replacement or a post reset can run four to six hours because the work involves concrete or full rewiring. If you’re asking because you have an urgent situation, we dispatch same-day in Frisco for calls before mid-afternoon, and a live person can tell you the earliest window when you call (940) 290-7996.
How much does gate repair cost in Frisco?
Most residential gate repairs in Frisco land between $150 and $900, with the lower end covering hinge pins, lock adjustments, limit switch resets, and the higher end covering control boards, hydraulic service, post replacement or full weld repairs. The written price comes before work begins, so the number you see is the number you pay unless we find something else and you approve it in writing first. A free estimate is part of every Frisco visit.
Do you service LiftMaster gate operators?
Yes. We’ve serviced and repaired hundreds of LiftMaster gate operators, and we stock their common OEM parts including limit switches, control boards, and remote receivers. LiftMaster units often show a diagnostic code through the LED, which gives us a starting point before we even open the housing. You’ll get a written record of the code, the reading, and the part we installed. Call (940) 290-7996 and we’ll confirm the specific model over the phone.
Do you offer emergency gate repair in Frisco?
Yes. A live person answers the phone 24 hours a day, seven days a week, and we route same-day calls in Frisco when the situation demands it: a gate stuck open on a house with kids or dogs, a gate stuck closed with a car trapped inside, or a commercial gate blocking deliveries. There’s no answering service menu and no callback queue. For anything that can’t wait until tomorrow, the number is (940) 290-7996.
Is your gate repair work warrantied?
Every Vance gate repair is covered by the 365-Day Done Right Promise: if the repair isn’t right within one full year, we come back and make it right at no additional charge. That covers both parts and labor for the specific repair we performed. The documentation we leave on every visit supports the warranty, so there’s a record of what was done, when, and with what part number.
How do I prepare for a gate repair visit?
Clear a path to the gate and the operator housing: park the car away from the gate’s swing or slide path, move any bikes or landscape equipment, and make sure the technician can reach both sides of the gate. If the gate is electric, note when the problem started and whether it happens consistently or intermittently, because that detail saves diagnostic time. If you have a key or a remote for testing, leave it accessible. We handle the rest, including the access control check and the documentation.
Schedule Your Gate Repair Service in Frisco Today
Call (940) 290-7996 and you’ll speak to a live person who can dispatch a Frisco technician same-day for urgent gates. Every visit starts with a free, no-obligation estimate, and every price is written down and agreed before any work starts. If you have a written estimate from another company, bring it and we’ll review it free. Your gate either works or it doesn’t. Let’s get it working, in writing, today.