Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Repair Across Prosper
Gate repair in Prosper usually takes between one hour and half a day, depending on what failed. Most homeowners here call us for two things: a Prosper Gate Motor & Opener that stopped responding, or a gate that swings out of alignment after rain. Both are fixable, usually the same visit. Call (940) 290-7996 and a live person answers, day or night.
We work throughout Prosper weekly, from Windsor and Star Trail down to Light Farms and the Tollway corridor. Our crews carry Viking, Ghost Controls, DoorKing, and LiftMaster parts on the truck, which means most repairs happen in one trip.
Why Vance Gate Repair Frisco Is Prosper’s Preferred Gate Repair Company
Vance Gate Repair has been the company Prosper homeowners call when the gate is too heavy to lift by hand and the builder’s subcontractor is no longer answering. We’ve repaired gates in every major Prosper subdivision, and the pattern is consistent: the hardware is good, the installation was rushed, and the clay soil underneath is doing what Blackland Prairie clay always does.
Adrian Vance founded this company in 2014 after years of commercial access-control work, and he brought the documentation habit with him. Every Prosper job leaves with a written price before work starts, a photo record of what was found and what was changed, and a one-year Done Right Promise. That’s The Haven Standard, and it applies to every visit, no exceptions.
We’re not a call-center operation. The person who answers the phone at (940) 290-7996 can tell you whether a sagging gate post is a hinge problem or a soil problem, because we’ve seen both on the same street in Prosper. Background-checked, uniformed technicians arrive with names and photos sent before they pull into your driveway.
Our Gate Repair Services in Prosper
Electric Gate Repair
When a Prosper electric gate stops responding, the cause is almost always one of three things: a dead operator board, a failed photo-eye (the infrared beam that stops the gate if something crosses the path), or a limit switch that’s drifted out of position. We diagnose the exact component, show you the reading, and replace only what’s failed. Most electric gate repairs in Prosper run between $180 and $420, with operator board replacement on a LiftMaster or Viking unit typically falling between $350 and $600.
Automatic Gate Repair
Automatic gate systems in Prosper live a hard life. The February 2021 ice storm exposed how many builder-installed operators lacked adequately weatherproofed housings, and freeze-damaged circuit boards are still failing years later. We service whatever motor is already on the property, including Viking, Ghost Controls repair in Prosper, DoorKing, Elite, LiftMaster, FAAC, BFT, and Linear. A full automatic gate system diagnosis in Prosper is $79, credited toward the repair if you proceed.
Hinge & Post Repair
Heavy ornamental iron gates hang on hinges, and hinges hang on posts. In Prosper, those posts sit in expansive clay that swells after spring rains and shrinks hard during the summer drought. That seasonal movement pulls anchor bolts, racks the gate frame, and eventually tears hinge welds. We reset posts, replace stripped anchors, and weld or replace hinges to match the original iron. Typical hinge and post repair on a Prosper driveway gate runs $250 to $700 depending on how many anchors have pulled and whether the post itself needs resetting in concrete.
Gate Realignment
A gate that scrapes the ground or won’t latch is usually out of alignment, and in Prosper the root cause is almost always soil movement. We don’t just lift the gate and tighten bolts. We measure the post lean, check the anchor depth, and correct the geometry so the gate hangs straight and cycles without binding. Realignment service in Prosper starts at $150 and includes adjustment of the hinges, latch, and close limit if needed.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Prosper
Your gate was installed with a specific operator for a reason, and you shouldn’t have to replace it just because a repair company only knows one brand. We service Viking, Ghost Controls, and DoorKing operators every week in Prosper, along with Elite, LiftMaster, FAAC, BFT, and Linear. Because entire Prosper streets often share identical builder-installed hardware, we stock the boards, gearboxes, and photo-eyes those systems use, which means we finish most repairs in a single visit instead of ordering parts and coming back.
Common Gate Repair Problems We See in Prosper Homes
- Post heave from Blackland Prairie clay. Spring rains push posts up and out of plumb; August drought pulls them the other way. The gate still works, then one day it drags the driveway. We see this specific failure on nearly every street in Windsong Ranch and Star Trail.
- Freeze-damaged operator boards from the 2021 ice storm. Builder-installed housings weren’t sealed for Collin County’s worst freeze in decades. Boards corrode slowly, then fail without warning, even years later.
- Identical failures clustered by subdivision. When one Viking or LiftMaster gearbox cracks on a street, the same part on the houses next door is usually weeks away from the same failure, because the same subcontractor installed all of them during the same construction phase.
- Sagging ornamental iron from undersized hinges. Big, beautiful gates need hinges that can carry the weight. In many 2015-2019 Prosper builds, the hinge barrels were sized for appearance, not load, and the stress shows up as sag and latch misalignment by year five or six.
Pricing for Gate Repair in Prosper, TX
Written pricing is the whole point. Before we touch a tool, you get a flat price in writing. Here’s what Prosper homeowners can expect:
- Realignment and hinge adjustment: $150 to $300
- Photo-eye alignment or replacement: $120 to $220
- Limit switch reset or replacement: $140 to $260
- Operator control board replacement: $350 to $600 depending on brand
- Hinge and post repair: $250 to $700 depending on anchor damage
- Full operator replacement: $900 to $1,800 depending on motor type and arm bracket condition
You’ll see the exact number before the work begins, and the number won’t change at the end. Free second opinions are available if you have a written estimate from another company and want it reviewed.
We Also Serve Cities Near Prosper
Our Gate Repair team serves Prosper and the surrounding area, including Frisco, Celina, Little Elm, and McKinney. If you’re in any of those cities, the same crews, the same written pricing, and the same Prosper level of documentation apply.
Serving Prosper, TX - Our Local Coverage Area
We’re based in the Prosper area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Repair in Prosper
Because the hinges are fine; the post is moving. Prosper sits on Blackland Prairie clay that swells and shrinks with moisture, and the post’s anchor bolts lose grip over time. We reset the post or install larger anchors, then realign the gate. Call (940) 290-7996 and we’ll inspect the anchors before recommending any hinge work.
Yes, and it’s usually the photo-eye. Rain splashes muddy water onto the lens or the mounting bracket shifts when the ground swells, breaking the beam that tells the gate it’s safe to close. We clean and realign the photo-eye, and the gate closes normally. If the board got wet, we’ll diagnose that separately and give you a written price before any replacement.
That’s the Prosper builder-boom pattern. The same gate subcontractor installed the same operator hardware across an entire phase, and those units are now failing together. In Star Trail specifically, we found three LiftMaster CSL24U slide gate operators on one cul-de-sac with identical freeze-damaged control boards from the February 2021 ice storm, and every housing lacked adequate weather sealing. We replaced the boards, sealed the housings, and corrected the sag on two adjacent ornamental iron swing gates. If your street matches that timeline, inspecting all the gates at once can save the whole block from repeated service calls.
Yes. We match the existing weld pattern, grind the repair smooth, and repaint with a rust-inhibiting primer and finish coat that matches the original iron. If the iron is rusted through, we cut out the bad section and splice in new stock, then blend the joint. We’ve done this on hundreds of Prosper gates, including the custom ornamental work common in Windsong Ranch and Light Farms. Send us photos or we’ll inspect in person; either way, the written price comes before work starts.
Often yes. A jerking, grinding slide gate usually means either the rack has shifted out of alignment with the pinion gear, or the wheel track has settled unevenly in the clay. In Prosper’s expansive soil, that track settlement is common. We correct the rack alignment, level the track if needed, and replace any gear teeth that are already chewed. Expect to pay between $180 and $450 for a typical rack and pinion correction in Prosper. Call (940) 290-7996 and we’ll give you a flat number before any work begins.
Your Prosper Gate, Fixed Right and Documented
When we leave a Prosper driveway, the gate works and you know exactly what was done. You get a photo log of every adjustment, a written record of the part number installed, and a one-year promise: if the repair isn’t right, we make it right, no argument and no fee. That’s Gate Repair under The Haven Standard.
Call (940) 290-7996 for a free estimate. A live person answers, and the price is in writing before any work starts.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Prosper and the surrounding area since 2014.