Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterHinge & Post Repair in Frisco, TX
Gate repair for hinges and posts in Frisco typically costs between $350 and $950, depending on the severity of the structural shift and the amount of welding required to restore alignment. Because residential gates are heavy, cantilevered structures, even a minor change in the footing or hinge assembly can cause the entire system to drag or stop latching correctly. We provide written, upfront pricing before we touch a single tool, ensuring you know exactly what the cost will be before work begins.
When you call us at (940) 290-7996, you are reaching a team that understands the specific demands of the Frisco area. Our soil composition often leads to shifting foundations, which puts unnecessary torque on gate posts. If your gate is grinding against the concrete or failing to engage with the latch, the issue is rarely just the motor. It is almost always a structural problem at the hinge or the post. As part of our commitment to Gate Repair in Frisco, we specialize in diagnosing these structural failures accurately the first time.
When You Need Hinge & Post Repair
You do not need to guess if your gate system requires structural attention. The signs are usually mechanical and visible. If you notice any of the following, the gate is likely struggling against its own weight, and the hinges or posts are the primary suspects.
- The gate drags on the driveway: If you see a fresh arc or scratch in your concrete, the post has likely leaned or the hinge has sagged. This friction burns out motors prematurely, especially on brands like BFT or FAAC.
- Uneven latch alignment: When the gate fails to meet the catch plate consistently, it is usually because the post has shifted, changing the geometry of the entire gate frame.
- Grinding or popping noises: If you hear metal-on-metal noise near the hinge point during operation, the bearings inside the hinge may have failed or the hinge pin may be bent.
- Visible leaning of the post: If the gap between the gate and the post is wider at the top than at the bottom, the post footing is likely compromised or the post itself is bending under the load.
- Gate stops mid-cycle: Modern operators like LiftMaster or Mighty Mule have safety sensors that detect resistance; if your gate hits the ground or drags, the motor will stop the gate to prevent damage, which is a symptom, not the cause.
If you see these signs, do not force the gate to operate. A gate that drags puts immense strain on the drive arm and the gearbox, which is why automatic gate repair should be handled promptly. We recommend you call (940) 290-7996 to have a technician inspect the structure before the repair costs increase due to secondary motor failure.
Our Hinge & Post Repair Process
We operate under The Haven Standard, which dictates that every visit must result in a documented record of what was found and what was corrected. We do not just fix the gate; we document the structural state of the hinge and post. Below is how we approach these repairs.
- Initial Assessment and Documentation: Upon arrival, we photograph the current state of the hinges and posts. We measure the plumb of the post and the integrity of the existing welds. Under Clause 4 of The Haven Standard, this photo record is left with you, so you have a baseline for the future.
- Structural Analysis: We determine if the hinge failure is due to wear (bearing fatigue) or structural failure (the post is moving). If the post is moving, we assess the footing. We never suggest replacing a post if a structural brace or re-plumbing can solve the issue safely.
- Repair or Replacement: If the hinge is seized or bent, we cut away the old hardware. We use heavy-duty, commercial-grade replacements that are sized for the weight of your specific gate. If the post is the issue, we may perform a sleeve-weld or, in severe cases, reset the footing.
- Alignment and Calibration: Once the structural work is complete, we re-align the gate to ensure it travels perfectly level. We then test the gate through ten full cycles to ensure it does not drag or bind at any point in the swing.
- Final Review: We walk you through the repairs we performed. We show you the documentation, explain the adjustments made to the swing, and provide our 365-Day Done Right Promise on the labor and parts.
Because we work with many different brands, including Mighty Mule and LiftMaster, we stock a wide variety of hinge sizes and mounting brackets. You can return to our home page to see the full list of services we provide beyond structural repairs.
BeforeAfterHinge & Post Repair Pricing in Frisco
We believe in upfront pricing. You will receive a written estimate before we begin any work. We do not charge “call-out” fees that are hidden in the final invoice. The costs below represent the typical range for structural gate repairs in the Frisco market.
| Service Item | Typical Price Range |
|---|---|
| Hinge Replacement (Per Hinge) | $350 – $550 |
| Post Re-plumbing/Bracing | $450 – $850 |
| Welding Repair (Structural Reinforcement) | $400 – $950 |
| Full Post Reset (Concrete Work) | $800 – $1,400 |
The final cost depends on the size of the gate and the type of material. A heavy ornamental iron gate requires different weld & rust repair techniques and hinge hardware than a lighter aluminum gate. Call (940) 290-7996 for an exact quote. We provide free estimates for all repairs, and if you have a written estimate from another company, we are happy to provide a second opinion at no charge.
FAQs - Hinge & Post Repair
Is it cheaper to repair the hinge or replace the entire gate?
In the vast majority of cases, repairing the hinge or the post is significantly cheaper than replacing the entire gate system. A full gate replacement is rarely necessary unless the frame itself has suffered catastrophic metal fatigue or the post footing is completely destroyed. We prioritize repair because it is more efficient and usually addresses the root cause of the mechanical failure.
Can you fix a leaning post without digging it up?
Often, yes. If the post has leaned due to soil movement or heavy gate weight, we can often reinforce the base or install a structural brace to pull the post back into alignment. We only recommend digging up and resetting the concrete footing if the structural integrity of the post itself is compromised beyond repair.
Why is my gate grinding even after I greased the hinges?
Grease only helps if the hinge is functional but dry. If the gate is still grinding, the hinge pin is likely bent or the internal bearings have collapsed, indicating you need lock repair or hinge service rather than just lubrication. The weight of the gate is no longer being distributed correctly, which means the gate is physically dragging on the ground or binding against the post. This requires mechanical repair, not just lubrication.
How long does a hinge repair take to complete?
Most hinge and post repairs take between two and four hours to complete on-site. We carry the necessary welding equipment and replacement hardware in our trucks, so we typically do not need to make multiple trips. We aim to have your gate fully operational before we leave your property.
Safety and Professional Standards
Repairing gate hinges and posts involves working with heavy steel structures that are often under tension. A gate falling from its hinges can cause significant property damage or personal injury. Furthermore, welding requires specialized equipment and safety protocols to prevent fire hazards and electrical damage to your gate’s control board. We strongly advise against attempting to weld hinges or reset posts yourself.
Our technicians are background-checked and uniformed. When we arrive, we operate with full insurance and bond coverage. We treat your property with the same care we would use on a commercial access-control site. Every job is managed by Adrian Vance, and we ensure that the work meets the standards of the equipment manufacturer. When you call (940) 290-7996, you are connecting with a team that values documentation and precision above all else. We do not rush, we do not cut corners, and we certainly do not leave a job until the gate is balanced and operating according to the safety specifications of the motor.
If your gate is struggling, dragging, or failing to latch, let us take a look. We provide honest, written assessments and transparent pricing. Call (940) 290-7996 today to schedule your service.
Written by Adrian Vance, Owner at Vance Gate Repair Frisco, serving Frisco.