Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Fast, Reliable Gate Installation Across Wylie
Gate installation in Wylie, TX most often means two things: a driveway gate on a shared or tight lot, and a post footing that has to survive Collin County clay. We set posts deeper than the original builders did, match HOA powder-coat finishes exactly, and price the job in writing before anyone touches a tool. If you’re in Woodbridge, Inspiration, Bozman Farms, or anywhere else in Wylie, call (940) 290-7996 and we’ll schedule a free measure, walk the site, and hand you a written scope and price.
Why Vance Gate Repair Frisco Is Wylie’s Preferred Gate Installation Company
We’re known in Wylie for doing the thing most gate companies skip: documenting what we find. Homes built between 2000 and 2015 in this city sit on expansive black clay that moves every season, and the original gate posts were typically set 18 to 24 inches deep, above the active clay zone. We see the result constantly: posts that look fine at grade but rock at the footing. Our technicians photograph the condition before and after, record the exact footing depth, and leave you a written record of what was installed and why.
Scheduling for Wylie jobs runs on measured, written timelines, not same-day promises. Installation work takes the time it takes. What you get from us is a free measure, a written price up front, and a documented photo log when the work is done. That’s Haven Standard Clause 1: have it in writing. Every Wylie install follows it.
Our Gate Installation Services in Wylie

Driveway Gate Installation
Driveway gates in Wylie are rarely a simple panel swap. The curb cut, the setback from the street, the HOA’s required setback and finish, and the condition of the existing posts all decide what’s actually possible. In Bozman Farms and other mid-2000s subdivisions, we regularly find the original post footings at 18 inches. We set new steel posts in 36-inch concrete footings with a ground anchor sleeve below the active clay zone so the gate doesn’t sag within two seasons.

Pedestrian Gate Installation
Pedestrian gates in Wylie’s HOA neighborhoods carry the same covenant requirements as driveway gates, often stricter: exact picket profile, exact powder-coat color, exact height. An off-the-shelf panel from a big-box store will fail inspection. We match the existing finish and profile from the start, and we photograph the match for your HOA file. If you’re near Lake Lavon on the east side, we also account for elevated humidity that accelerates surface rust, and we’ll recommend the right primer and coating for that exposure.

Sliding Gate Installation
Sliding gates solve a specific Wylie problem: shared driveways and narrow side yards where a swing gate cannot clear the curb or the neighbor’s fence. East-side Wylie has a high concentration of shared driveways with a right of way. A slide gate works there, but only if the operator is set up with a loop detector and a safety photocell. Without those, a delivery van or garbage truck backing up will crush the leaf. We install the gate and the safety system together, every time.

Swing Gate Installation
Swing gates still make sense on Wylie properties with enough setback and a flat approach. The issue is almost never the panel; it’s the post. A swing gate hung on a post that’s already leaning in clay soil will bind at the latch within a year. When we install a swing gate, we check the post depth and plumb before we order anything. If the footing is shallow, we either replace the post or install a ground anchor sleeve as part of the quoted scope. Our Gate Installation team handles this daily across Wylie.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterTrusted Brands We Service in Wylie
We work on what’s already on your property, and we install operators from the brands Wylie homeowners actually have. We service and install Ghost Controls, DoorKing, and Elite systems regularly, and we carry common parts and operator arms for those brands in our Dallas-Fort Worth stock, which means less waiting on a distributor. If you have a Mighty Mule on an existing gate and you want to keep it, we’ll work with it. We don’t steer you toward a replacement motor to make the invoice bigger. The written price covers what you need, not what we’d rather sell you.
Common Gate Installation Problems We See in Wylie Homes

- Shallow footings from the original builder. Mid-2000s Wylie subdivisions frequently have gate posts set 18 to 24 inches deep. That’s above the active clay zone, so the post heaves and leans on a seasonal cycle. A new gate bolted to those posts will bind within two seasons. The fix is a 36-inch footing with a ground anchor sleeve.
- HOA finish and profile mismatches. Wylie HOAs, particularly in Inspiration and Woodbridge, specify gate materials and powder-coat colors in the covenants. Installing a panel that’s close but not exact fails inspection and means a redo. We match the picket profile and finish before we order anything, and we document the match.
- Shared driveway slide gate failures. East of downtown, shared driveways are common, and a swing gate often will not clear the curb. A slide gate is the right call, but it needs a loop detector and photocell. We’ve been called to replace slide gates that got hit by delivery trucks because the safety system was never installed. We install the safety system as part of the scope, not as an add-on.
- Rust acceleration near Lake Lavon. Homes near the lake on Wylie’s eastern edge get more humidity than the rest of the city, and iron gates surface-rust faster there. A gate that would look fine in central Wylie will show rust in three years near the water. We factor that into the coating recommendation and quote it as a line item.
Pricing for Gate Installation in Wylie, TX
A pedestrian gate installation in Wylie typically runs $900 to $2,400, depending on the panel size and whether we’re resetting posts. A single driveway swing gate with new posts runs $2,800 to $5,500. A sliding gate for a shared or narrow driveway runs $3,500 to $7,000, including the operator, rack, loop detector, and safety photocell. If we’re installing an operator on an existing gate, expect $1,200 to $2,200 for the operator and control wiring, plus any post realignment. Every quote is written and flat. You agree to the number before we start, and that number does not move unless you change the scope in writing.
For a Wylie-specific quote, call (940) 290-7996. The measure is free, and the price you get is the price on the paper.
We Also Serve Cities Near Wylie

Vance Gate Repair Frisco serves the full northeastern DFW corridor around Gate Installation in Wylie. Our crews also cover Allen, Plano, McKinney, and Carrollton from the Dallas-Fort Worth metro office. If you’re outside Wylie but need the same written-price installation work, call the same number: (940) 290-7996.
Serving Wylie, TX - Our Local Coverage Area
We’re based in the Wylie area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Wylie

Most shared driveways in Wylie’s eastern subdivisions cannot fit a swing gate because the curb cut curves and the leaf would strike the neighbor’s fence or block the right of way. A slide gate rides parallel to the property line and uses a narrower footprint. We’ll tell you which one fits your site during the free measure, and we’ll quote the gate and the safety system together.
We set new gate posts in 36-inch concrete footings with a ground anchor sleeve. The original builders in mid-2000s Wylie subdivisions often poured 18 to 24 inches, which sits above the active clay zone and heaves within two seasons. Thirty-six inches gets below the movement. If the existing posts are sound and plumb, we’ll tell you that too and quote accordingly. Call (940) 290-7996 for a site walk.
Yes. We match the picket profile and the powder-coat color to your HOA’s covenant spec before ordering any material. Wylie HOAs in neighborhoods like Woodbridge and Inspiration specify exact finishes, and a close-but-not-exact panel fails inspection. We document the match in the job record and leave you a copy for the HOA file.
Yes, a solar operator works on a sliding gate in Wylie’s sun exposure, but you need a battery bank sized for the operator’s cycle count and a panel with a clear south-facing position. We install solar on slide gates where trenching power to the gate would cross a driveway or sidewalk. We’ll quote the panel, battery, and operator as line items so you know exactly what you’re paying for.
Sometimes. If the posts are set 18 to 24 inches deep, they’re likely moving with the clay, and a new operator will bind against that movement. We check plumb and footing depth before we mount anything. If the posts are sound, we’ll use them. If they’re rocking at the footing, we’ll quote the post work as a separate line item. Call (940) 290-7996 and we’ll check it during the free measure.
Call for a Free Measure and Written Price in Wylie
If you’re in Wylie and you need a new gate, a slide gate for a shared driveway, or an operator on an existing gate, call (940) 290-7996. We’ll schedule a free measure, walk the site with you, and hand you a written scope and a flat price before any work starts. That’s how we do every job. Adrian Vance started this company in 2014 on commercial access-control documentation, and we brought that same record-keeping habit to residential gates. You get a written price, a documented photo log, and a 365-Day Done Right Promise on the completed install.
Written by Adrian Vance, Owner at Vance Gate Repair Frisco, serving Wylie since our founding in 2014.





Before
After
Before
After