Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Plano, TX
Gate access control in Plano usually means one of two things: a keypad or intercom that stopped talking to the opener, or an HOA requirement that every visible component match the neighborhood’s original ironwork. Most calls we take in Plano involve gates built between 1980 and 2005 that have simply reached the end of their mechanical life, compounded by clay soil that keeps moving posts out of alignment. Call (940) 290-7996 and a live person answers, any hour.
Why Plano Homes Are Different
Plano’s residential boom of the 1980s through 2000s produced thousands of HOA-governed subdivisions where ornamental wrought iron driveway and community-entrance gates were standard features, not upgrades. Those gates are now 25 to 40 years old. Because covenants across these master-planned communities enforce like-for-like wrought iron aesthetics, a repair that would be a simple parts swap in most cities often requires matching period ironwork and navigating HOA architectural review. Add North Texas blackland prairie clay, which swells after rain and shrinks during drought, and you get gate posts that rack out of plumb and hinge anchors that pull loose without any frost involvement. Summer heat above 105°F regularly trips thermal cutoffs on older operators, which is why we see a predictable surge of service calls in July and August across Plano.
Our Main Plano Services
Most Plano homeowners contact us for one of three gate jobs: a repair on an existing iron gate, a full installation where the old gate is beyond saving, or a motor and opener service where the mechanical gate is fine but the automation has failed.
Gate Repair in Plano
Most repair calls in Plano start with a gate that drags on the driveway, a hinge that has pulled out of a brick or stone column, or a latch that no longer catches. Clay soil movement is the usual root cause. We realign posts, reweld broken pickets, replace worn hinges, and match the finish to the surrounding ironwork before the HOA asks questions. The written price is handed over before any work starts. See Gate Repair in Plano for the full breakdown.
Gate Installation in Plano
When a gate is beyond reasonable repair, a new installation in Plano usually means matching the subdivision’s original ironwork style. We measure, order, fabricate, and install while handling the HOA submittal paperwork with photos and material specs. The goal is a gate that looks like it has been there since the house was built. Details on process and pricing are on Gate Installation in Plano.
Gate Motor & Opener in Plano
Plano’s heat is hard on gate operators. Motors without thermal cutoffs lock out on 105°F afternoons, and control boards fail after years of exposure to North Texas temperature swings. We service nine automation brands and replace operators without steering you toward a different brand than what is already on the property. See Gate Motor & Opener in Plano for makes, models, and pricing.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Plano
Gate access control in Plano spans Gate Access Control systems from simple keypads to video intercoms tied into home automation. The common thread in Plano is that these systems were installed when the neighborhood was built, and the wiring, keypads, and readers are now hitting end-of-life at the same time. Hard water from the North Texas Municipal Water District leaves calcium scale on keypad housings and reader contacts, and summer heat pushes older control boards into failure. Here are the two sub-jobs we handle most in Plano.
Keypad Entry
Signs you need it
A keypad that works intermittently, ignores certain buttons, or needs a code entered twice before the gate moves is failing.
What it costs in Plano
Keypad replacement in Plano typically runs $180 to $340 for parts and labor, with the written price delivered before work begins.
How we do it
We test the keypad at the wiring termination, verify voltage from the opener, replace the unit and any corroded connectors, and photograph the new settings.
Video Intercom
Signs you need it
Audio that cuts out, no video feed, or a call button that does not ring inside the house points to a failing intercom or degraded wiring.
What it costs in Plano
Video intercom replacement in Plano runs $1,000 to $3,000 depending on whether the wiring can be reused or new cable must be pulled.
How we do it
We test the existing cable, replace the outdoor station and indoor monitor, configure the door release, and leave you a photo record of every connection.
What Gate Access Control Costs in Plano
| Item | Typical range in Plano |
| Keypad replacement | $180-$340 |
| Remote control replacement | $95-$180 |
| Video intercom replacement | $1,000-$3,000 |
Can you replace an access control keypad on the same day?
Yes. Most keypad replacements in Plano are completed same-day because the parts are stocked locally. The written price is handed to you before any work starts, and the photo record is left with you when the technician leaves.
Does the HOA need to approve a new keypad or intercom in Plano?
Usually not for electronic components, but visible housings and mounting plates may require architectural review. We photograph the existing setup and provide the documentation most Plano HOAs request before the work is scheduled.
Gate Parts & Welding in Plano
Gate Parts & Welding in Plano is where the age of the housing stock shows most clearly. Hinges that have carried a 200-pound iron gate for 30 years wear out, posts set in clay soil lose their plumb, and cosmetic pickets snap from repeated movement. The water here is hard enough that calcium scale builds on hinge pins and latch mechanisms, a failure mode that surprises technicians from coastal markets where rust is the bigger enemy. We weld on-site, replace what cannot be saved, and match the finish to the original ironwork.
Hinge Replacement
Signs you need it
A gate that sags, scrapes the driveway, or shows a visible gap at the top hinge is telling you the hinge pin or barrel has worn beyond adjustment.
What it costs in Plano
Hinge replacement in Plano typically runs $220 to $340 per hinge, including welding and finish matching.
How we do it
We support the gate, cut out the old hinge, weld in the replacement, and paint or powder-coat the repair area to match the surrounding iron.
Post Replacement
Signs you need it
A post that leans, has pulled away from the gate, or wobbles when the gate moves needs replacement rather than shimming.
What it costs in Plano
Post replacement in Plano typically runs $500 to $1,200 depending on whether the post is set in soil or anchored in concrete.
How we do it
We excavate the old post, set the new one below the clay movement depth, anchor it, and weld the hinge barrels before rehanging the gate.
What Gate Parts & Welding Costs in Plano
| Item | Typical range in Plano |
| Hinge replacement | $220-$340 per hinge |
| Post replacement | $500-$1,200 |
| Rail repair | $300-$700 |
Can you weld a broken iron picket without replacing the whole gate?
Yes. We weld the broken picket in place, grind the joint smooth, and match the finish to the original iron. In Plano subdivisions with strict covenants, this route usually avoids an HOA architectural review.
How long does a welded repair last on a Plano gate?
A welded repair on clean, prepped iron typically lasts as long as the original gate, provided the post underneath is stable. We photograph every weld before finish is applied so you have a record of the work.
Brands We Service in Plano
We service Mighty Mule, LiftMaster, FAAC, and BFT operators across Plano, along with five other major automation brands. Parts for these systems are stocked locally, which keeps most repairs to a single visit. See our brands for the full list.
Pricing for Gate Repair in Plano, TX
| Service | Typical range in Plano |
| Keypad replacement | $180-$340 |
| Remote control replacement | $95-$180 |
| Video intercom replacement | $1,000-$3,000 |
| Hinge replacement | $220-$340 per hinge |
| Post replacement | $500-$1,200 |
| Rail repair | $300-$700 |
| Gate rollers | $150-$350 |
| Custom welding | $250-$900 |
Plano prices push upward when a gate has multiple failed components, when the post is set in concrete rather than soil, or when HOA documentation adds a round of architectural review to the job. Regardless of scope, the price is written and handed to you before any work starts, under Haven Standard Clause 1.
Neighborhoods We Serve in Plano
We work in Plano subdivisions across the city, including:
- Willow Bend
- Gleneagles
- Whiffletree
- Kings Ridge
- Deerfield
Most Plano neighborhoods see a technician on-site within one business day, and emergency calls are answered by a live person around the clock.
Service Area - Cities Near Plano
In addition to Plano itself, we serve Allen, TX, The Colony, TX, Carrollton, TX, and Wylie, TX. Dispatch and scheduling are coordinated from the brand’s Dallas-Fort Worth office, and crews reach all of these cities daily.
Serving Plano, TX - Our Local Coverage Area
We’re based in the Plano area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Plano
Most Plano HOAs require architectural review only for visible changes: new gate panels, different ironwork styles, or altered posts. Internal mechanical repairs and automation work usually do not need approval, but we provide photos and material specs when a visible component changes.
A live person answers our phone 24 hours a day, and most Plano neighborhoods see a technician within one business day. Security failures where a gate will not close take priority, and we will tell you on the phone when a crew can be on-site before you commit to anything.
Yes. Every Plano job gets a written scope and a written price before a tool is picked up, under Haven Standard Clause 1. That is the whole point of how we work, and it applies to a $95 remote replacement or a $3,000 intercom install.
Call (940) 290-7996 for a free estimate on gate repair in Plano. A live person answers, and the price you are quoted is the price you will pay.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Plano Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.