Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in The Colony, TX
Gate access control work in The Colony usually means a community entrance keypad, phone entry, or card reader that stopped talking to an operator that was installed 20 or 30 years ago. The housing stock here, built in developer phases through the 1980s and 1990s, means hundreds of HOA entrance gates are aging out at the same time. That makes access control retrofits the most common call we run in this city, ahead of single-family driveway gate repairs. If your keypad stopped accepting codes or your call box rings dead, call (940) 290-7996 and describe what you’re seeing. We’ll tell you what it likely is, what it costs in writing, and when we can be there.
Why The Colony Homes Are Different
The Colony sits on North Texas black clay, the kind that swells hard in spring rain and shrinks and cracks through July and August. Gate posts set in that soil heave and tilt seasonally. By August, a post that was plumb in April can be out by an inch and a half, which binds the gate leaf and kills the operator’s limit switches over time. We reset and re-shim posts here more than we replace motors, and that’s not true of every nearby city.
The housing stock is another factor. Most of The Colony’s neighborhoods are 1970s to 1990s brick single-family subdivisions under HOA governance, with wrought iron or ornamental steel fencing as the mandated standard. Gate repairs almost always involve surface-mounted iron hinges on steel swing gates, not wood privacy gates. HOA approval often adds days to a job timeline, so we write our scope and price before the approval goes in. That way the board sees exactly what will be done and what it costs, and nothing changes after the vote.
Our Main The Colony Services
Most The Colony calls fall into three buckets: a gate that won’t move, a gate that needs to be replaced, or a motor that needs service or retirement. Here’s what each looks like in this city.
Gate Repair in The Colony
Repair work here is usually about the clay. A gate that drags on the concrete apron, a post that’s leaning, a hinge that’s pulling away from the brick column, a photo-eye that got knocked out of alignment by hail or a mower. We diagnose in writing, photograph every adjustment, and hand you a record before we leave. That’s the standard on every Gate Repair in The Colony job.
Gate Installation in The Colony
New gate work in The Colony means HOA paperwork first. We provide a written scope with dimensions, materials, hinge and post details, and a line-item price that the board can approve as-is. Then we build to that scope. Most installs here are ornamental steel swing gates on existing brick columns, sized to match the neighborhood standard. See Gate Installation in The Colony for the full process.
Gate Motor & Opener in The Colony
Many The Colony subdivisions were gated by the same regional developers in overlapping years, so entire clusters hit operator failure in the same season. We stock parts for the common FAAC and Linear models accordingly, and we service nine automation brands rather than steering you toward a replacement you don’t need. Details are on the Gate Motor & Opener in The Colony page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in The Colony
In The Colony, access control work usually lands at a community entrance: a keypad pedestal with corroded wiring, a phone entry board that stopped dialing, or a card reader that quit reading. The compressed build-out era here means many of these systems were installed around the same time and are now failing in clusters. We retrofit the access system onto the existing operator rather than replacing equipment that still runs. Most of this work falls under Gate Access Control, and the price is always in writing before we touch a wire.
Keypad Entry
Signs you need it
Residents report codes that work intermittently, or the keypad accepts a code but the gate doesn’t move.
What it costs in The Colony
Keypad replacement and wiring repair in The Colony typically runs $250 to $650, and a full pedestal rebuild with new conduit runs $800 to $1,500.
How we do it
We test voltage at the pedestal, identify whether the failure is the keypad, the wiring run, or the operator board, then replace only what failed and photograph the new terminations.
Phone Entry
Signs you need it
The call box rings endlessly with no audio, or visitors report it never rings the resident’s phone at all.
What it costs in The Colony
Phone entry board replacement in The Colony typically runs $500 to $1,000, and cellular or internet retrofit runs $700 to $1,800.
How we do it
We verify the phone line or cellular signal at the board, test the relay to the operator, and install a replacement board configured to the existing numbering, then document every setting.
What Gate Access Control Costs in The Colony
| Item | Typical range in The Colony |
|---|---|
| Keypad replacement and wiring repair | $250 - $650 |
| Phone entry board replacement | $500 - $1,000 |
| Card reader replacement or retrofit | $600 - $1,400 |
How long does access control repair take in The Colony?
Most keypad and phone entry replacements are done in a single visit, usually two to four hours after diagnosis. Parts are stocked on the truck for common FAAC and Linear systems.
Can you integrate access control with an older gate operator in The Colony?
Yes. We retrofit phone entry and keypad systems onto operators that are 20 years old, as long as the operator board still functions. We replace the access layer, not the whole gate. Call (940) 290-7996 for a written quote.
Gate Parts & Welding in The Colony
The Colony’s iron and steel gates fail at the joints and attachments more often than anywhere else: hinges pulling from brick columns, posts leaning on clay, bottom rails rusted through. Our Gate Parts & Welding work addresses the structure itself, not just the motor. Every repair is welded or bolted to match the existing steel, and you get a photo record of the work before we pack up.
Hinge Replacement
Signs you need it
The gate sags toward the latch side, or the hinge pin looks oval instead of round.
What it costs in The Colony
Hinge replacement in The Colony typically runs $120 to $300 per hinge, and $400 to $900 for a full swing gate set.
How we do it
We cut or unbolt the old hinge, align the gate on a jack, weld in the replacement, and photograph the set position.
Post Replacement
Signs you need it
The post leans visibly, the gate drags on the latch side, or the base shows hairline cracks from clay movement.
What it costs in The Colony
A single post replacement in The Colony typically runs $850 to $2,500 including concrete and re-setting, and ornamental column repairs run higher.
How we do it
We excavate around the failed post, pour a new footing set below the clay’s active zone, plumb the post, and re-hang the gate the same day when possible.
What Gate Parts & Welding Costs in The Colony
| Item | Typical range in The Colony |
|---|---|
| Hinge replacement | $120 - $300 per hinge |
| Post replacement | $850 - $2,500 |
| Rail repair | $350 - $900 |
Can you weld a gate without removing it in The Colony?
Often yes. Surface-mounted rail and hinge repairs are done in place with the gate jacked and blocked. We only remove the gate when the post or lower rail is too far gone.
What does post replacement cost in The Colony’s clay soil?
Post replacement runs $850 to $2,500 depending on depth, concrete volume, and whether brick columns need rebuilding. Clay-swollen soil means deeper footings, which costs more. Call (940) 290-7996 for a written line item.
Brands We Service in The Colony
We service Mighty Mule, LiftMaster, FAAC, and BFT equipment, among others. Common access and operator parts for these brands are kept in local truck stock for The Colony jobs, which keeps most repairs to a single visit. Full details on our brands.
Pricing for Gate Repair in The Colony, TX
| Service | Typical range in The Colony |
|---|---|
| Gate repair service call | $95 - $250 |
| Post replacement | $850 - $2,500 |
| Hinge replacement | $120 - $300 per hinge |
| Swing gate motor replacement | $1,200 - $2,800 |
| Slide gate motor replacement | $1,500 - $3,500 |
| Keypad replacement | $250 - $650 |
| Phone entry board replacement | $500 - $1,000 |
| Card reader replacement | $600 - $1,400 |
| Rail repair | $350 - $900 |
| Full gate installation | $2,500 - $9,000 |
Prices in The Colony push upward when clay movement requires deeper post footings, or when HOA architectural review slows a job and adds coordination time. What doesn’t change is the promise: the written price you approve before work starts is the price on the invoice.
Neighborhoods We Serve in The Colony
We cover the full city, including these neighborhoods:
- Legend Trail
- Stewart Peninsula
- Tribute
- Colony 14
- Lakeview Park Estates
Most The Colony neighborhoods are within a short drive of our DFW dispatch point, and access-control diagnosis calls are typically scheduled same-day or next-day depending on the queue.
Service Area - Cities Near The Colony
We also run calls into Little Elm, TX, Carrollton, TX, Plano, TX, and Coppell, TX. The same written-price standard applies on every job, in every one of these cities.
Serving The Colony, TX - Our Local Coverage Area
We’re based in the The Colony area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in The Colony
Most repair calls in The Colony are scheduled same-day or next-day. Emergency calls where a gate blocks access or won’t close are prioritized, and a live person answers the phone 24/7 to get you on the schedule.
In most subdivisions, yes. The board usually wants a written scope and price before approving. Our written quote is designed to satisfy that requirement, and we can slow the job to match the board’s approval calendar.
We review any written competitor estimate at no cost. If the scope is apples-to-apples, we’ll tell you that. If the competitor’s scope misses something, we’ll point that out too. The second look is free.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What The Colony Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.