Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in McKinney, TX
Gate access control in McKinney usually means retrofitting an automated opener onto an ornamental iron driveway gate in a Stonebridge Ranch or Craig Ranch HOA, where the architectural review board has already approved the gate’s original powder-coat finish and wants any new keypad or intercom to match the ironwork profile. We handle that every week: the wiring diagram is different for every brand, the HOA requirement is different for every subdivision, and the black clay soil under the posts is always moving. Call us at (940) 290-7996 and we’ll send a technician with a written scope and a fixed price before anything gets touched.
Why McKinney Homes Are Different
McKinney’s build-out came fast. Most of the housing stock inside Stonebridge Ranch and Craig Ranch went up between 2000 and 2015, which means thousands of ornamental steel driveway gates, courtyard gates, and automated community entrance gates are now hitting their 15-to-20-year repair cycle at the same time. The hardware is often identical across an entire subdivision: same opener brand, same hinge pattern, same powder-coat spec. That concentration makes parts predictable, but it also means a repair that ignores the HOA’s published ironwork standard will bounce back as a violation notice.
The other half of the story is soil. McKinney sits on Collin County’s Blackland Prairie, where expansive black clay swells after rain and contracts hard during summer drought. Gate posts heave and tilt out of plumb, which then stresses opener arms and misaligns latch strikes. North Texas ice storms add a second seasonal failure mode for hinges, wheels, and exposed wiring. A gate that worked fine in April can be dragging its opener rail by August because the post moved three-quarters of an inch.
Our Main McKinney Services
Most McKinney homeowners reach out about one of three things: a gate that has stopped repairing itself, a gate they want installed to match their subdivision’s ironwork, or a motor that quit driving one.
Gate Repair in McKinney
McKinney gate repair jobs usually start with a sagging leaf, a latch that stopped catching, or a wheel that seized after the post heaved in wet clay. We measure the gap, check the HOA’s approved ironwork profile when a section needs replacing, and quote the fix in writing before any work starts. If the post has moved, the repair plan has to address the ground first. Gate Repair in McKinney covers the full process, from hinge replacement to full leaf rehanging.
Gate Installation in McKinney
New gate installation in McKinney means matching the subdivision’s original ornamental iron patterns and RAL powder-coat color codes, not just setting posts and hanging a leaf. We pull the HOA design standards before ordering any steel, so the finished gate looks like it was part of the original build. That is a different job than a standalone ranch gate. Gate Installation in McKinney walks through what a full install includes and what it costs.
Gate Motor & Opener in McKinney
Opener failure in McKinney is often a load problem before it is an electrical problem. When a post tilts out of plumb, the opener arm meets resistance, the limit switch drifts, and the board eventually overheats. We diagnose the entire run: arm geometry, force settings, photo-eye alignment, and board voltage. Then we quote the repair or replacement in writing and photograph the final settings. Gate Motor & Opener in McKinney details the process for each brand we service.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in McKinney
Gate access control in McKinney is heavily shaped by the HOA-governed, master-planned communities that dominate the city’s housing stock. Most jobs involve adding or repairing an entry system on a gate that was built in a narrow window between 2000 and 2015, which means the hardware is often consistent across a whole subdivision. The problem we solve most often is a keypad or intercom that stopped talking to the opener after a season of black-clay movement pulled a wire loose or shifted a strike plate. We service whatever brand is already mounted, rather than steering you toward a full replacement, and the final settings get photographed and filed under our Gate Access Control documentation standard.
Keypad Entry
Signs you need it
The keypad lights up but the gate does not open, or it works intermittently after rain when the clay soil has shifted the post enough to stretch the wiring.
What it costs in McKinney
Keypad entry repair in McKinney typically runs $150 to $450, and a full keypad replacement lands between $450 and $1,400 depending on the model and whether we need to match the HOA’s exterior finish.
How we do it
We test voltage at the keypad, trace the wire path back to the control board, reset the relay output, and photograph the working configuration before we leave.
Remote Control
Signs you need it
A remote that worked last week now only opens from five feet away, or one remote works while a second identical unit does nothing.
What it costs in McKinney
Remote control repair in McKinney commonly runs $100 to $300 for reprogramming and receiver troubleshooting, while adding a new remote or receiver is $150 to $500.
How we do it
We check the receiver’s antenna, verify the dip-switch or rolling-code match, and reprogram all remotes in one pass so the system behaves like new.
What Gate Access Control Costs in McKinney
| Item | Typical range in McKinney |
|---|---|
| Keypad repair | $150 - $450 |
| Keypad replacement | $450 - $1,400 |
| Remote or receiver | $150 - $500 |
Does the HOA have to approve a new keypad in McKinney?
Yes, in most Stonebridge Ranch and Craig Ranch subdivisions the keypad housing has to match the approved ironwork profile and finish. We check the HOA’s design standards before ordering parts so a new keypad does not trigger a violation notice.
Can you work on the access system that is already on my McKinney gate?
Yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule systems, and we repair what is mounted rather than pushing a full replacement. Call (940) 290-7996 for an exact quote.
Gate Parts & Welding in McKinney
Gate parts and welding in McKinney is where black clay soil and HOA ironwork standards collide. When a post heaves, the first casualty is usually a hinge that bends, a roller that seizes, or a section of ornamental steel that cracks at the weld. Because Stonebridge Ranch and Craig Ranch architectural committees publish specific ironwork profiles and RAL powder-coat color codes, replacing a damaged panel with generic stock hardware leaves the homeowner facing a violation notice. We pull the HOA’s design standards before ordering any steel, then document the repair with weld photos and a written part record under our Gate Parts & Welding standard.
Hinge Replacement
Signs you need it
The gate drags on the latch side, the leaf sits visibly lower than the post, or the hinge pin has worn into an oval hole from years of post movement.
What it costs in McKinney
Hinge replacement in McKinney typically runs $150 to $350 per hinge, including field welding and paint touch-up to match the existing powder-coat.
How we do it
We cut the old hinge off, set the leaf back to level, weld the new hinge in place, and photograph the finished weld before touching up the finish.
Post Replacement
Signs you need it
The post leans more than a few degrees out of plumb, the concrete base has cracked, or the gate no longer latches because the strike moved with the post.
What it costs in McKinney
Post replacement in McKinney generally runs $500 to $1,500 per post, depending on depth, concrete volume, and whether the surrounding brick or stone work has to be cut back.
How we do it
We saw-cut the old base, set a new post in a deeper footing sized for Blackland Prairie clay movement, and re-hang the leaf to the original HOA profile.
What Gate Parts & Welding Costs in McKinney
| Item | Typical range in McKinney |
|---|---|
| Hinge replacement | $150 - $350 per hinge |
| Post replacement | $500 - $1,500 per post |
| Custom weld repair | $150 - $600 |
Can you match the original ironwork in my McKinney HOA?
Yes. We pull the subdivision’s published design standards and RAL powder-coat code before fabricating or ordering any replacement section, so the repair matches the original profile and finish. Call (940) 290-7996 to schedule.
Do you weld on site in McKinney?
Yes, our technicians carry mobile welding equipment for hinge and bracket repairs. Larger custom sections are fabricated to match the HOA spec, then field-welded and photographed on site.
Brands We Service in McKinney
We service Ghost Controls, DoorKing, Elite, and Mighty Mule systems in McKinney, along with five other major automation brands. Common boards, remotes, and photo-eyes for these brands are stocked locally, which keeps most repairs to a same-day or next-day turnaround. See our brands for the full list.
Pricing for Gate Repair in McKinney, TX
| Service | Typical range in McKinney |
|---|---|
| Keypad repair | $150 - $450 |
| Keypad replacement | $450 - $1,400 |
| Remote or receiver repair | $100 - $300 |
| Remote or receiver replacement | $150 - $500 |
| Hinge replacement | $150 - $350 per hinge |
| Post replacement | $500 - $1,500 per post |
| Rail repair | $200 - $600 |
| Custom welding | $150 - $600 |
| Gate roller replacement | $100 - $300 per set |
Two things push a McKinney gate price up: a post that has heaved far enough to need a deeper footing in Blackland Prairie clay, and an HOA finish spec that requires matching a custom powder-coat or ironwork profile rather than off-the-shelf stock. Our price is always written and handed over before work starts, so the number on the page is the number on the invoice.
Neighborhoods We Serve in McKinney
We serve the full McKinney area, including the neighborhoods and subdivisions where gate work is most common:
- Stonebridge Ranch
- Craig Ranch
- Trinity Falls
- Tucker Hill
- Adriatica
Most McKinney callouts are reached within one business day, with same-day scheduling available when a gate is stuck open or will not close and secure.
Service Area - Cities Near McKinney
Our crews also cover the neighboring communities around McKinney, including Allen, TX, Prosper, TX, Celina, TX, and Plano, TX. If your gate is anywhere in Collin County or the adjacent areas, call us at (940) 290-7996 for a written estimate.
Serving McKinney, TX - Our Local Coverage Area
We’re based in the McKinney area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in McKinney
We reach most McKinney neighborhoods within one business day, and same-day scheduling is available when a gate is stuck open, will not close, or has left a driveway unsecured. A live person answers the phone 24/7, so you will not hit an answering service.
In most cases, repair work that matches the original ironwork profile and powder-coat color does not require new HOA approval. If a section has to be replaced, we pull the design standards first and quote the matching material before any work begins.
Yes. Every McKinney gate job gets a written scope and a fixed price handed over before a tool is picked up. That is Clause 1 of the Haven Standard, and it applies to every repair, from a hinge weld to a full access-control retrofit.
If your McKinney gate is sagging, stuck, or off its automation, call us at (940) 290-7996. You will get a written price, a technician who documents the work, and a repair that is done right the first time.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What McKinney Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.