Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Celina, TX
Gate access control in Celina usually means retrofitting a 2016-to-2024 ornamental iron gate in a master-planned community like Light Farms or Mustang Lakes, where the original builder-grade keypad or photo-eye has failed well before the gate itself has. We handle the full stack: keypads, remotes, phone entry, card readers, and the wiring between them. If your gate won’t open or the intercom stopped ringing, call (940) 290-7996 and a live person answers.
Why Celina Homes Are Different
Celina is one of America’s fastest-growing cities, and tens of thousands of homes in communities like Light Farms, Mustang Lakes, and Painted Tree were built and gated within a narrow 2016-2024 window. That means a massive wave of HOA-spec ornamental iron gates are hitting their first major failure cycle at the same time. The failures are concentrated and predictable: post movement from Collin County’s expansive black clay soil, hinge welds stressed by that same movement, and operators whose factory limit settings were never corrected for a gate that settled two or three degrees out of level. At the rural fringe, older acreage properties have agricultural pipe or wood-panel livestock gates that fail very differently. The repair demand here doesn’t resemble a mature suburb like Frisco or McKinney. It’s a synchronized wave, and the fixes follow patterns we see every week.
Our Main Celina Services
These are the three services Celina homeowners call about first when a gate stops working or never existed in the first place.
Gate Repair in Celina
Most repair calls in Celina start as a gate that drags, a latch that won’t catch, or a hinge that’s pulling away from a post shifted by black clay expansion. We diagnose the mechanical fault before anything else, because replacing a hinge on a post that’s still moving just puts the same problem back in the ground. Read the full scope on our Gate Repair in Celina page.
Gate Installation in Celina
New driveway and courtyard gates in Celina almost always need HOA architectural review before a panel goes up, and the review committee typically specifies the exact powder-coat color and picket profile. We pull the submittal package together with the spec sheet so the approval doesn’t stall the job. Details are on our Gate Installation in Celina page.
Gate Motor & Opener in Celina
Summer heat above 100°F makes steel gate frames expand enough to bind latches and jam operators, and a motor that was sized for a lighter gate will fault out when the gate gets heavy in July. We test travel, force settings, and current draw before recommending repair or replacement. See the full breakdown on our Gate Motor & Opener in Celina page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Celina
Gate access control in Celina is mostly retrofit work on gates built between 2016 and 2024, where builders installed entry-level keypads and photo-eyes that fail within a few years. The soil movement here compounds it: a post that shifts half an inch throws a photo-eye out of alignment and the safety circuit starts reversing the gate or refusing to close. We service whatever is on the gate now rather than steering you toward a full replacement, and every visit ends with a written record of what was found and set. You can read the broader scope on our Gate Access Control service hub.
Keypad Entry
Signs you need it
The keypad accepts some codes intermittently, the buttons have gone dead, or delivery people can’t get a code to work after rain.
What it costs in Celina
Keypad replacement or reprogramming in Celina typically runs $185-$450 depending on the keypad model and whether we’re reusing the existing wiring.
How we do it
We test the wiring for voltage drop, install or reprogram the keypad, and photograph the new code-set so the homeowner has a record.
Remote Control
Signs you need it
A remote that works only from five feet away or stopped pairing after a power blink usually points to a receiver or antenna fault.
What it costs in Celina
Remote and receiver fixes in Celina typically run $150-$350 including programming and testing of all existing remotes.
How we do it
We check the receiver frequency, pair new remotes, and leave a written note of every remote code cleared and re-added.
Phone Entry
Signs you need it
The gate calls but no audio passes, or the call drops before the open command registers.
What it costs in Celina
Phone entry repair in Celina typically runs $250-$600 depending on whether it’s a cellular unit or a landline-tied controller.
How we do it
We test the phone module’s signal, verify the relay output, and document the incoming call path so the next technician doesn’t re-diagnose it.
What Gate Access Control Costs in Celina
| Item | Typical range in Celina |
|---|---|
| Keypad replacement | $185-$450 |
| Remote and receiver repair | $150-$350 |
| Phone entry module repair | $250-$600 |
Can you replace the keypad without changing the whole system?
Yes. If the existing wiring and controller are intact, we swap the keypad and re-pair it to the board, which usually takes under an hour. Call (940) 290-7996 for a written quote.
Does the HOA have to approve an access control change in Celina?
Often yes. Architectural review committees in Celina communities specify equipment finishes and mounting locations, so we prepare a one-page spec sheet you can submit. Call (940) 290-7996 and we’ll walk you through it.
Gate Parts & Welding in Celina
Gate parts and welding in Celina splits into two very different jobs: ornamental steel or wrought-iron gates inside HOA communities, and older pipe or wood-panel gates on the rural fringe. On the HOA side, the local architectural review committee specifies exact powder-coat colors and picket profiles, so matching finishes is part of the repair, not an afterthought. At the rural edge, we’re usually cutting out rusted pipe hinges and re-welding a frame that’s been standing since well before the subdivision boom. This is our Gate Parts & Welding service line.
Hinge Replacement
Signs you need it
The gate sags visibly or scrapes the driveway, and the hinge weld shows a crack or rust line where the barrel meets the post plate.
What it costs in Celina
Hinge replacement in Celina typically runs $250-$550 per hinge, including cutting out the old weld, surface prep, and re-welding.
How we do it
We cut the failed hinge, clean the post face, weld the new hinge, and photograph the finished weld from both sides before paint.
Post Replacement
Signs you need it
The post leans visibly, the gate won’t latch, or the post base shows fresh cracks after a wet-dry cycle in the black clay.
What it costs in Celina
Post replacement with a concrete footer in Celina typically runs $400-$900 per post depending on depth, gate size, and site access.
How we do it
We saw-cut the old post at grade, dig a deeper footer, set the new post square and plumb, and let the concrete cure before re-hanging.
What Gate Parts & Welding Costs in Celina
| Item | Typical range in Celina |
|---|---|
| Hinge replacement | $250-$550 per hinge |
| Post replacement with footer | $400-$900 per post |
| Weld repair on ornamental steel | $180-$400 per repair |
Do you match the powder-coat color on HOA gates in Celina?
Yes. We source the specified finish and can provide a color sample for architectural committee approval before we complete the repair. Call (940) 290-7996 for details.
Can you weld a broken ornamental iron gate without replacing the whole panel?
Almost always. We grind back to clean steel, weld the crack, and re-coat the repair zone so the gate is stronger than before the break. Call (940) 290-7996 for a written price.
Brands We Service in Celina
We work on motors and controllers from Ghost Controls, DoorKing, Elite, and Mighty Mule, among others, and keep common boards, remotes, and limit-switch parts on the truck for same-day fixes where the gate allows it. See the full list on our brands page.
Pricing for Gate Repair in Celina, TX
| Service | Typical range in Celina |
|---|---|
| Keypad replacement | $185-$450 |
| Remote and receiver repair | $150-$350 |
| Phone entry module repair | $250-$600 |
| Hinge replacement | $250-$550 per hinge |
| Post replacement with footer | $400-$900 per post |
| Weld repair on ornamental steel | $180-$400 per repair |
| Gate repair service call | $145-$350 |
| Gate motor replacement | $600-$1,400 |
| Gate installation, full | $2,500-$7,000 |
What pushes Celina prices up is soil movement: a post that needs re-setting because the black clay shifted it adds labor and concrete. The price we quote is the price you pay, written down before any work starts, under our Haven Standard.
Neighborhoods We Serve in Celina
We cover Celina and the surrounding HOA communities as well as the rural acreage surrounding the city. Most calls get a same-day or next-day response depending on part availability.
- Light Farms
- Mustang Lakes
- Painted Tree
- Bluewood
- The Creeks of Legacy
Service Area - Cities Near Celina
We also serve Prosper, TX, Frisco, TX, McKinney, TX, and Little Elm, TX. If you’re on the edge of Celina and one of these cities, call us and we’ll confirm coverage and current response time for your street.
Serving Celina, TX - Our Local Coverage Area
We’re based in the Celina area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Celina
We usually reach most Celina addresses the same day you call, often within a few hours for a gate stuck open or a failed operator. A live person answers the phone around the clock at (940) 290-7996.
For structural or finish changes, usually yes. We prepare a written scope and finish spec for your architectural review committee, and simple like-for-like part swaps often don’t need submittal. We’ll tell you which applies.
Yes. The flat price you sign before we start is the price you pay when we leave. It’s our operating rule under The Haven Standard: written scope, written price, and a photo record on every visit.
Call (940) 290-7996 for a free estimate on gate access control or parts and welding work in Celina, TX.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Celina Customers Say
"Gate had been dragging for a year. They photographed the bent hinge post, explained why the operator kept faulting, and gave me a fixed price to correct both."
- Terrence B."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C.