Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Carrollton, TX
Gate access control in Carrollton usually comes down to one of five systems: keypad entry, remote control, phone entry, card reader, or video intercom. Most of the calls we get are from homeowners in HOA-governed subdivisions built between 1975 and 1998 whose original entry hardware has finally given out after decades of Blackland Prairie clay movement. If your gate won’t respond to the code pad or the remote stopped working after the last freeze, call us at (940) 290-7996 and we’ll tell you what it costs before anyone picks up a tool.
Why Carrollton Homes Are Different
Carrollton’s residential boom ran from the mid-1970s through the late 1990s, which means a large share of the city’s driveway and side-yard gates are now 25 to 45 years old and reaching end-of-life at the same time. These are mostly ornamental-iron and wood-privacy gates installed at original construction, and they sit on posts set into Blackland Prairie expansive clay. That clay expands with spring rainfall and shrinks sharply in summer drought, cycling posts in and out of plumb every single year. Over decades, this cumulative movement shifts frames far enough out of square that latches, rollers, and hinges fail entirely.
Ice storms add a second layer of trouble. The February 2021 freeze damaged automated gate openers, control boards, and buried wiring across Carrollton, and every winter weather event since has created a surge of electromechanical repair calls in the weeks after. If you live along the Josey Lane, Frankford, or Belt Line corridors, you may also face HOA architectural-control rules that require ornamental-iron picket style, finish color, and spacing to match community entry gates. That means matching legacy ironwork rather than substituting modern pressed-steel panels, which catches out-of-area contractors off guard every time.
Our Main Carrollton Services
Carrollton homeowners most often need one of three things: a gate that won’t open or close, a new gate that meets HOA specs, or a motor and opener that works through clay-driven frame shifts and winter ice. Here’s what each involves in this city.
Gate Repair in Carrollton
A sagging iron gate on a post that’s drifted out of plumb is the most common repair call in Carrollton, and it usually traces back to the clay, not the hinge. We check post lean, hinge wear, and weld condition together because they fail together here. Gate Repair in Carrollton covers everything from latch alignment to full frame square-up.
Gate Installation in Carrollton
New gate installations in Carrollton almost always involve matching an existing HOA standard for picket style, color, and spacing. You need a written quote that names the exact material and finish before the post holes are dug. Gate Installation in Carrollton walks through the full process, including what happens when the old post base is cracked from clay movement.
Gate Motor & Opener in Carrollton
Carrollton’s freeze-thaw cycle is hard on control boards and buried low-voltage wiring, and a motor that worked fine in September may dead-start in February. We service nine automation brands, so the fix is usually a board or limit-switch calibration rather than a full replacement. Gate Motor & Opener in Carrollton covers swing and slide operators, from Viking and Ghost Controls to DoorKing and Elite.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Carrollton
Gate access control in Carrollton means the keypad, remote, phone entry, card reader, or video intercom that tells the gate motor when to move. Most of these systems were installed with the original gate, which means they’ve weathered the same 25 to 45 years of clay movement and freeze cycles as the ironwork itself. What fails here isn’t random; it’s usually corroded terminations from soil moisture, a control board damaged by an ice-storm power surge, or a keypad whose wiring has been stretched and chafed by a post that no longer sits plumb. On the Gate Access Control side, we treat every visit as a diagnostic job first: identify the failed component, write down the part number and price, and only then start the work.
Keypad Entry
Signs you need it
The code works sometimes but not others, or the keypad lights up but the gate won’t trigger.
What it costs in Carrollton
Keypad replacement in Carrollton typically runs $145-$260 installed, depending on whether we’re matching an existing mount or replacing the wire run.
How we do it
We test voltage at the keypad, check the wire for clay-driven stretch damage at the post base, replace the unit, and photograph the new code set and terminal connections.
Phone Entry
Signs you need it
Visitors call the gate line and hear nothing, or the system rings but won’t release the gate.
What it costs in Carrollton
Phone entry repair and replacement in Carrollton falls between $285 and $680 depending on whether the issue is the board, the relay, or the cellular unit itself.
How we do it
We identify whether the failure is in the phone board, the relay, or the carrier signal, then replace only the failed component and leave a written record of every wiring change.
What Gate Access Control Costs in Carrollton
| Item | Typical range in Carrollton |
|---|---|
| Keypad replacement | $145-$260 |
| Phone entry repair or replacement | $285-$680 |
| Card reader installation | $225-$470 |
My keypad works but the gate won’t open in Carrollton. What’s wrong?
The keypad may be sending voltage but the motor isn’t receiving it. In Carrollton, the usual culprit is a broken or corroded wire where it enters the post base through shifting clay. We test continuity first, then replace only the failed section.
How much does a video intercom cost in Carrollton?
A video intercom for a Carrollton gate runs $390-$1,100 depending on whether you need a single monitor or a multi-station setup. We write the exact price before any work starts. Call (940) 290-7996 and we’ll give you a number over the phone.
Gate Parts & Welding in Carrollton
The iron gates installed in the 1970s through the 1990s are now corroding at hinges, weld joints, and bottom rails all across the city, and patching one spot without checking the post underneath won’t hold. We approach Gate Parts & Welding as a mechanical repair, not a cosmetic one: find the root cause, replace or weld the part, and document what we did.
Hinge Replacement
Signs you need it
The gate drags on the ground or the latch no longer lines up because a hinge pin has worn oval.
What it costs in Carrollton
Hinge replacement in Carrollton typically runs $85-$220 per hinge, depending on whether the post side needs a new weld plate.
How we do it
We remove the old hinge, inspect the post for clay-driven cracking, weld or bolt a new hinge in place, and confirm the gate swings square before we leave.
Post Replacement
Signs you need it
The post leans visibly, the gate binds at the latch, or the post base shows cracking from years of soil expansion and contraction.
What it costs in Carrollton
Post replacement in Carrollton costs $275-$650 per post, including setting the new post in concrete and re-hanging the gate.
How we do it
We cut and remove the old post, dig and set the new one deeper than the clay’s active shrink-swell zone, and re-hang the gate once the concrete has cured.
What Gate Parts & Welding Costs in Carrollton
| Item | Typical range in Carrollton |
|---|---|
| Hinge replacement | $85-$220 per hinge |
| Post replacement | $275-$650 per post |
| Custom welding repair | $120-$400 per repair |
Can you weld a cracked iron gate in Carrollton without replacing the whole gate?
Yes, in most cases. We grind the crack, weld it, and reinforce the joint. The fix holds as long as the post it hangs on is still sound. If the post is moving, we address that first.
How much does gate rail repair cost in Carrollton?
Rail repair typically runs $120-$400 depending on how much of the rail is corroded and whether we’re welding in a splice or a full section. The written quote you approve before work starts is the price you pay.
Brands We Service in Carrollton
We service Viking, Ghost Controls, DoorKing, and Elite openers and access hardware in Carrollton, along with five other major automation brands. Most common control boards, keypads, and photo-eyes are stocked locally or available same-day. Our brands page lists the full lineup and what we keep on the truck.
Pricing for Gate Repair in Carrollton, TX
| Service | Typical range in Carrollton |
|---|---|
| Keypad replacement | $145-$260 |
| Phone entry repair or replacement | $285-$680 |
| Card reader installation | $225-$470 |
| Video intercom | $390-$1,100 |
| Hinge replacement | $85-$220 per hinge |
| Post replacement | $275-$650 per post |
| Custom welding repair | $120-$400 per repair |
| Gate roller replacement | $95-$240 per roller |
What pushes a Carrollton gate repair price up is usually the post. If the clay has moved the post far enough out of plumb that the frame no longer squares, the fix includes post work, not just a part swap. Every price is written down and handed to you before any work starts, so the number you approve is the number you pay.
Neighborhoods We Serve in Carrollton
We take gate repair calls across Carrollton, from the established subdivisions along Josey Lane and Frankford Road to the neighborhoods around Belt Line and Hebron Parkway. Most Carrollton jobs are reached within the same day, and emergency calls are answered live at any hour.
- Castle Hills
- Indian Creek
- Homestead
- Rosemeade
- Woodlake
Service Area - Cities Near Carrollton
Our crews also cover the surrounding area for gate repair and access control work. That includes Coppell, TX to the west, The Colony, TX to the north, Plano, TX to the east, and Grapevine, TX to the southwest. Scheduling is coordinated from our Dallas-Fort Worth office, and dispatch sends a technician to Carrollton directly.
Serving Carrollton, TX - Our Local Coverage Area
We’re based in the Carrollton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Carrollton
Most Carrollton jobs are reached the same day, and a live person answers the phone 24/7. Emergency calls are dispatched as soon as a technician is available. Call (940) 290-7996 and we’ll tell you when we can be there.
Simple repairs like hinge or keypad replacement generally don’t require a permit in Carrollton. New installations or major post work may, and your HOA may have its own approval process. We can tell you what applies to your specific job before we start.
Yes. Many Carrollton HOAs require matching ornamental-iron picket style, color, and spacing. We source or custom-fabricate matching legacy ironwork rather than substituting modern panels, and we document the finish and dimensions in our written quote.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Carrollton Customers Say
"Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.