Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Murphy, TX
Most gate failures in Murphy trace back to Collin County’s expansive black clay soil, not worn hardware. The ground under your gate posts moves with every rain and dry spell, slowly pulling posts out of plumb until hinges bind, latches miss, and motors burn out working against the resistance. We’re Vance Gate Repair, and we fix the gate and the reason it failed. Call (940) 290-7996 for a written price before any work begins.
Why Murphy Homes Are Different
Murphy’s housing stock came up fast between 2000 and 2015, mostly master-planned subdivisions with HOA-governed aesthetics. That means a high concentration of ornamental wrought-iron driveway gates and cedar privacy fence walk gates, all installed within a tight window and all aging into the same repair cycle at the same time. The brick exteriors and matching iron gates look great from the street but hide a structural problem underneath: Collin County’s shrink-swell clay expands after rain and contracts through Murphy’s long dry summers, heaving posts seasonally. A gate that dragged last August may bind completely after a wet spring. We reset posts, realign hinges, and adjust operators to work with soil movement, not fight it.
HOA design standards add a layer most homeowners don’t anticipate. Gate replacements in Murphy often need community approval for materials, height, and finish before any swap-out proceeds. We quote the work in writing and document everything with photos so you have a record for the HOA and for any future technician.
Our Main Murphy Services
Murphy homeowners call us most often for these three jobs, each with its own dedicated page and local pricing details.
Gate Repair in Murphy
Binding gates, sagging hinges, and latches that stopped catching are the routine calls in Murphy’s mid-2000s subdivisions. We find the cause, name it, and fix it with a written price in hand before any tool comes off the truck. Gate Repair in Murphy
Gate Installation in Murphy
New gates in Murphy mean matching HOA-approved materials and styles, from ornamental iron driveway gates to cedar walk gates. We measure, quote in writing, and install to the community standard. Gate Installation in Murphy
Gate Motor & Opener in Murphy
Automated openers from the original buildouts are hitting end of service life across Murphy, often after years of compensating for post-heave alignment problems. We diagnose the motor and the geometry. Gate Motor & Opener in Murphy
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Murphy
Murphy’s mid-2000s subdivisions went in with automated driveway gates, and those original openers are now reaching the end of their rated service life all at once. In this city, an access control call often reveals that the opener has been masking a post-heave alignment problem for years by compensating with torque, then failing suddenly when the motor can no longer overcome the bind. We service nine major automation brands including DoorKing, Elite, and Ghost Controls, so we work on whatever motor is already on your property rather than steering you toward a replacement. See our full Gate Access Control service details for the complete scope.
Keypad Entry
Signs you need it
The keypad works intermittently, fails after rain, or a code stopped working without explanation.
What it costs in Murphy
Keypad replacement or repair in Murphy typically runs $165-$340 depending on the unit and whether wiring needs replacement.
How we do it
We test the keypad, check the wiring run, replace or reprogram the unit, and photograph the new settings for your record.
Phone Entry
Signs you need it
Callers can’t get through to the gate, the intercom audio is crackling, or the relay stopped triggering the opener.
What it costs in Murphy
Phone entry system repair in Murphy typically runs $190-$380 depending on the control board and wiring condition.
How we do it
We trace the phone line or cellular connection, test the relay output, replace the failed component, and document the fix.
What Gate Access Control Costs in Murphy
| Item | Typical range in Murphy |
|---|---|
| Keypad repair or replacement | $165-$340 |
| Phone entry repair | $190-$380 |
| Video intercom installation | $500-$950 |
Can you work on any access control brand in Murphy?
Yes. We service LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so we repair the system you have instead of pushing a replacement. Call (940) 290-7996 for a written quote.
Does my HOA need to approve access control work in Murphy?
Often yes, especially for visible equipment like video intercom panels or keypads mounted on community-facing columns. We provide photo documentation of the planned install to support your HOA application.
Gate Parts & Welding in Murphy
Murphy’s ornamental iron driveway gates and cedar privacy fence walk gates were installed in a narrow window from roughly 2000 to 2015, and now the hinges, posts, and weld joints are failing on the same schedule. In this city, expansive clay soil is the primary driver of post movement, which transfers stress into hinges and welds until something cracks or tears. We repair and replace those components, and we weld in the field where the damage allows. Our Gate Parts & Welding page covers the full range of parts work.
Hinge Replacement
Signs you need it
The gate drags on the ground, the hinge pin is visibly worn or bent, or the gate drops when opened.
What it costs in Murphy
Hinge replacement in Murphy typically runs $95-$225 per hinge depending on material and load rating.
How we do it
We remove the gate, cut off the old hinge, weld or bolt the new one, and photograph the finished joint before rehanging.
Post Replacement
Signs you need it
The post leans visibly, the gate no longer latches, or the post has lifted out of the ground after a rain cycle.
What it costs in Murphy
Post replacement in Murphy typically runs $275-$575 per post including setting in concrete.
How we do it
We extract the old post, dig a deeper footing to resist clay movement, set the new post in concrete, and verify plumb before rehanging.
What Gate Parts & Welding Costs in Murphy
| Item | Typical range in Murphy |
|---|---|
| Hinge replacement per hinge | $95-$225 |
| Post replacement per post | $275-$575 |
| Custom welding repair | $140-$310 |
Can you weld a cracked ornamental iron gate in Murphy?
Yes. We weld ornamental iron and steel gates on site, grind the repair smooth, and repaint to match. Most weld repairs run $140-$310 depending on the crack length and access. Call (940) 290-7996 for an exact quote.
Do you replace cedar privacy gate frames in Murphy?
Yes. We rebuild cedar walk gate frames, replace rotted rails, and install new hinges and latches. The price is written before work starts, under Haven Standard Clause 1.
Brands We Service in Murphy
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule openers already installed on Murphy gates, plus LiftMaster, FAAC, BFT, Linear, and Viking. Parts for common models are stocked locally, so most repairs finish in one visit. See our brands for the full list.
Pricing for Gate Repair in Murphy, TX
| Service | Typical range in Murphy |
|---|---|
| Keypad repair or replacement | $165-$340 |
| Phone entry repair | $190-$380 |
| Video intercom installation | $500-$950 |
| Hinge replacement per hinge | $95-$225 |
| Post replacement per post | $275-$575 |
| Custom welding repair | $140-$310 |
Prices in Murphy run higher when HOA approvals delay the schedule or when soil movement has damaged multiple components at once: a post reset plus hinge replacement plus opener realignment is a common combination here. Whatever the scope, the price is written and handed to you before any work starts, and the photo record documents what we found and what we changed.
Neighborhoods We Serve in Murphy
We cover all of Murphy, from the established subdivisions along Murphy Road to the newer developments near the eastern edge of town. Response time is typically same-day or next-day for repair calls, with emergency access available around the clock.
- Maxwell Creek Ranch
- Rolling Ridge Estates
- Timbers Estates
- Southfork
- Murphy Farms
Service Area - Cities Near Murphy
Beyond Murphy, our crews cover the surrounding Collin County and Dallas-Fort Worth communities. We serve Frisco, TX, Prosper, TX, The Colony, TX, and Little Elm, TX, among others. Dispatch and scheduling are coordinated from our Dallas-Fort Worth office, with crews serving Murphy locally.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Murphy
Most Murphy repair calls get same-day or next-day service, and a live person answers the phone 24/7. Emergency calls for a gate stuck open or a failed motor are prioritized. Call (940) 290-7996 and we’ll tell you when a technician can be there.
Repairs that match existing materials, height, and finish usually don’t need HOA approval, but replacements and visible equipment additions often do. We provide photo documentation of the planned work to support your application without delaying the repair itself.
We handle the whole gate system: posts, hinges, welds, motors, access control, and wiring. One crew, one written price, one photo record at the end. Nothing is subcontracted out, and the 365-Day Done Right Promise covers all completed work.
Call Vance Gate Repair at (940) 290-7996 for a free estimate on any gate repair, access control, or parts job in Murphy. We’ll quote the work in writing before anything starts.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Murphy Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E."Our gate was hit by a delivery truck. They came out, documented the damage properly for the insurer, and the claim went through without an argument."
- Camille R.